1.1 SBT-ZV9 glass edger is suitable for processing straight-line edge & 45°arrises of glass sheet with various sizes and thicknesses.
1.2 The main base of the glass edger is made of cast iron.
1.3 The glass thickness can be showed on a digital display or touch screen.
1.4 With a special design of the in-feed section for controlling the desired amount of glass removal, the operator does not need to adjust each spindle individually.
1.5 The independent felt wheel and the cerium water re-circulation system can make the flat edge more shining.
1.6 The input and output conveyor of the glass edger adopt timing belt which can improve the transmission precision.
1.7 It is easy to operate and the glass edger has good performance.
2. Technical Data
2.1 Processing glass thickness: 3-25mm
2.2 Angle of arris: 45°
2.3 Min.size of glass: 80mm×80mm / Max.size of glass:3000mm×3000mm
2.4 Processing speed: 0.5-6.0m/min
2.5 Installed power :19.08KW;
2.6 Dimension Size: 7400mm×1000mm × 2500mm(L*W*H)
2.7 Packing Size:4200mm*950mm*1600mm(L*W*H)
3. Wheels Disposal
|No.1||Diamond wheel||Rough grinding of flat edge|
|No.2||Diamond wheel||Semi-fine grinding of flat edge|
|No.3||Resin wheel||Semi-fine grinding of front arris|
|No.4||Fine grinding wheel||Fine grinding of front arris|
|No.5||Resin wheel||Semi-fine grinding of back arris|
|No.6||Fine grinding wheel||Fine grinding of back arris|
|No.7||Resin wheel||Fine grinding of flat edge|
|No.8||Fine grinding wheel||Polishing of flat edge|
|No.9||Wool felt wheel||Polishing of flat edge|